Hardware manual

4-82 Agilent 7500 Series ICP-MS Hardware Manual
4Maintenance
Removing the Einzel Lens - Omega Lens Assembly
The Einzel lens - Omega lens assembly is positioned inside the intermediate
section of the vacuum chamber behind the extraction lenses (Figure 73). The
slide valve moves between these two sets of lenses to seal the vacuum
chamber.
Figure 73 Einzel Lens - Omega Lens Assembly
Einzel Lenses - Omega
Lenses Assembly
Screw 1
Screw 2
CAUTION
Disassemble in a dust-free place.