Hardware manual

4-54 Agilent 7500 Series ICP-MS Hardware Manual
4Maintenance
6 Examine the torch.
Examine the torch for wear and contamination. Replace it if you find
cracks, chips, or evidence of distortion due to overheating.
Install the joint connecting tube between the spray chamber and the torch.
Tighten the spray chamber hold down screw and replace the two ball joint
clamps. Close the torch box cover and tighten the thumb nut to secure the
cover.
Figure 59 ICP Torch
Projection for
Shield Plate
Torch
Projection for
Torch Stand
Anxiliary Gas
Plasma Gas
Torch Stand
Torch Stand Hole