Hardware manual

Maintenance 4

Agilent 7500 Series ICP-MS Hardware Manual 4-21

Internal Standard Tubing Kit

This kit is for on- line addition of internal standard solution. Please refer to

the following description for this kit prior to use. The connector block is made

from high- purity materials, which have been thoroughly tested by Agilent, and

no sample contamination has been observed. The block has a very small dead

volume (1 micro liter), minimizing sample washout time. This kit also serves as

the “sample line connector block” at the same time.

Figure 39 Tubing Diagram

Nebulizer

Internal Standard

Solution

Tube Adapter

Teflon Tube

Back

Ferrule

Back

Ferrule

Front Ferrule

Front

Ferrule

Teflon Nut

Teflon Screw

Pump Tube

Sample Tube

Internal Standard Solution

When Not Automatically Added

Sample (Pump)

Internal Standard Connector Block