User`s manual

1.2 EB164 Summary
Table 1–2 (Cont.) EB164 Features Summary
Characteristic Description
Input/Output
Input device interfaces PS/2 style keyboard and mouse
Serial Two RS423-compatible (9-position) serial communications
ports
Parallel One parallel (Centronics compatible) communications port
Bus options Total of 6 option slots
PCI bus Supports two 64-bit PCI options slots at 5V and two 32-bit
PCI option slots at 5V
ISA bus Supports three 16-bit ISA option slots
IDE One IDE interface supporting up to 2 drives
Diskette One 82077-compatible diskette controller supporting up to 2
drives with 1.44MB and 2.88MB formats
Environmental Characteristics (Operating)
Operating temperature 10°C to 40°C (50°F to 104°F)
Maximum rate of (dry
bulb) temperature
change
11°C/hour
2°C/hour (20°F/hour 4°F/hour)
Relative humidity
Maximum wet bulb
Minimum dew point
10%–90% noncondensing
32°C (90°F)
2°C (36°F)
EMC compliance Compliance certification is the responsibility of the system
integrator. The EB164 was tested in industry-representative
enclosures to prove feasibility of emissions compliance.
Shock and vibration Passing of shock and vibration tests is dependent on the
method used to mount the system board, the design of the
enclosure, and how the enclosure is supported. Testing is
the responsibility of the system integrator.
Physical Characteristics
Form factor Standard, full-size PC AT board
Width/depth 30.73 cm (12.10 in) 33.15 cm (13.05 in)
1–8 Introduction to the EB164