Specifications

17 January 1997 – Subject to Change
System Configuration and Connectors 2–1
2
System Configuration and Connectors
This chapter describes the user-environment configuration, board connectors and
functions, and jumper functions. It also identifies jumper and connector locations.
The AlphaPC 164 uses jumpers to implement configuration parameters such as
system speed, data path width, and boot parameters. These jumpers must be
configured for the user’s environment. Onboard connectors are provided for the I/O
interfaces, SIMMs, and serial and parallel peripheral ports.
Figure 2–1 shows the board outlines, and identifies the location of jumpers,
connectors, and major components. Table 2–1 lists and defines these items. Refer to
Section 2.1 for jumper configurations. Refer to Section 2.2 for connector pinouts.