User manual

16
17
Passive mode
Active mode
1. 2.
3. 4.
Switching between Passive and Active mode
For the CN7, CN8, CM7 and CM9 Mach has developed a completely new, extremely safe and user friendly way to
switch between Passive and Active mode. The procedure is very quick and simple:
1. Unscrew the terminal plate with the six screws
2. Remove the Molex speaker wire connector from the passive socket
3. Insert the Molex speaker wire connector into the active socket
4. Remove the jumper from the passive socket
5. Insert the jumper in the active socket
5. Reposition the terminal plate and tighten all screws