User manual

Parallel system

If you require more speakers for better sound distribution and you only have a limited number of output channels

on your amplier, you can connect more than one speaker to each channel. This can be done by linking the

speakers for each channel in parallel as illustrated. However, always remember to check the minimum loading

impedance specied for the amplier. The maximum number of identical C-range speakers that can be connected

to each amplier channel is the impedance of the speaker divided by the minimum specied speaker impedance

rating of the amplier (often 4 ohms).

Note!

CN8 and CM9 are 4 ohm

speakers. When running 2

speakers in parallel your

amplier should be able

to run in a 2 ohm load.

Output

Amplier

In/Link

Mains

In/Link