Model A1000
Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or sending an email to mssupport@machspeed.com.
verify that your download service allows you to download files in MP3 format, or a non encrypted WMA format before loading files to the player. ● The playback times listed refer to the maximum playback times possible, using the best power savings. The actual playback time may differ as adjustments to screen brightness, power savings modes, volume, etc are made. ● As parameters such as bitrate and codecs differ, the player may not be compatible with all listed files.
Increase the separation between the equipment and the receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution Do not use the player in exceptionally cold or hot, dusty, damp or dry environments. Do not drop, strike, or throw your player. Physical damage to your player will void ALL warranties.
Appearance Basic Operations Powering on: Set the ON/OFF switch to the ON position, then press and hold the PLAY button for 5 seconds. Powering off: Press and hold the PLAY button for 5 seconds, until the player powers off. Once the device is powered off, set the ON/OFF switch to the OFF position.
Please note that if you do not press and hold the PLAY button before setting the ON/OFF switch, the device will not retain any settings changes you have made. Adjusting the volume: In Music, Record, Radio modes, press the VOL- or VOL+ buttons to decrease or increase the volume. Charging the player: To charge your player, set the ON/OFF switch to the ON position and connect the device to a powered USB port.
2. Open the Windows Media Player Sync tab. 3. Drag your music to the sync list (on the right of the screen) from the list on the left. Once you have selected the music you wish to add to the player, press “Start Sync”.
4. Windows Media player will load the songs on to your MP3 player. 5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device.
COPY AND PASTE NOTE- This method is also used to load your lyric or text files to the player. 1. Connect the MP3 player to a working USB port. 2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the “My Computer” section of your computer.
4. Locate the drive created by the unit, generally just called Removable Disk, with a letter in Parenthesis. Drive letters vary depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or by right clicking to open the option menu then left click on the desired drive. 6. Locate the music stored on your computer. Generally this is stored in the “My Music” folder of your computer.
on in the empty space, and select Paste. This will transfer the song on to your MP3 player. 8. Repeat step 7 for as many songs as you want to copy on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Simply drag your MP3 files to the device.
Music Mode NOTE- This player supports audio files in MP3 or non encrypted WMA formats. If your files are not in these formats, they will not play. On the main menu, select “Music” using the Previous or Next buttons, and then press the Menu button to enter the Music mode. when you enter Music mode, the first song in the list will begin playing automatically. While playing music Press the Play button to pause a file, press again to resume playback.
the Next or Previous buttons to select the file or folder you wish to access, then press Menu button to play. Press the VOL+ button to return to previous screen. Note: To set your repeat mode, play mode, or EQ mode, go to Setting, then Music menu. Radio Mode NOTE- Before entering Radio mode, please insert your headphones, as they act as an antenna. On the main menu, select “Radio” using the Previous or Next buttons, and then press the Menu button to enter the Radio mode.
Radio Mode Submenu Press the Menu button to make a selection, or the VOL+ button to exit the menu. Manual- Sets the tuner to manual search. Press the Next or Previous buttons to browse through frequencies. Auto-Automatically scans the available stations and saves any with a strong signal as a preset. This will override any presets you have manually saved. Preset- Listen the preset stations which you have manually saved or were saved by Auto scan.
On the main menu, select “Record” using the Previous or Next buttons, and then press the Menu button to enter the Recording mode. In Recording mode, briefly press the Play button to begin recording, and when finished, briefly press the Play button again to pause it. Briefly press the Menu button to save the current recording and begin a new one. Recordings you have created are accessed in the Music Mode. Text Mode NOTE- This player will only access text files in TXT and LRC formats.
Explorer Mode On the main menu, select “Explorer” using the Previous or Next buttons, and then press the Menu button to enter the Explorer mode. Press the Next or Previous buttons to select the file or folder you wish to access, then press Menu button to play. Press the VOL+ button to return to previous screen.
On the main menu, select “Settings” using the Previous or Next buttons, and then press the Menu button to enter the Settings mode. Use the Next or Previous buttons to select and item, and the Menu button to confirm. Briefly press the VOL+ button to return to the previous screen. Press and hold the Menu button to return to the Main Menu. Music Repeat Mode- Allows you to set the audio repeat mode.
Stereo Switch- flip between stereo or mono reception. FM Region-You can select your local region. Display Submenu Allows you to change display settings and power savings options. Backlight Time-This allows you to adjust the length (in seconds) that the screen will stay lit when not used. The smaller the time increment, the longer your player will last between charges. Default 15s.
If at any point, you have questions about your player or experience an issue with your player, please feel free to contact our technicians at mssupport@machspeed.com or by phone at 580 272 0035.
Model A1000
