User`s guide

Supporting the i.MX53 Reference Board DISP0 LCD
i.MX53 System Development User’s Guide, Rev. 1
Freescale Semiconductor 18-3
18.2 Adding Support for an LCD Panel
To provide an example for how to add support for an LCD panel, this section shows the code and
commands used for adding the support for the CLAA057VA01CT LCD. CLAA057VA01CT is a 5.7" color
TFT-LCD (Thin Film Transistor Liquid Crystal Display) module. It is composed of an LCD panel, driver
ICs, control circuit, touch screen, and LED backlight. The 5.7" screen produces a high resolution image
that is composed of 640 × 480 pixel elements in a stripe arrangement. It uses a 16 bit RGB signal input to
display 262K colors.
VGA output Driven by TVE (Not supported in TO1)
Up to WSXGA+ @ 60 Hz, 24 bpp
(WSXGA+: 1680x1050)
LVDS I/F Up to UXGA or 2xWXGA @ 60 Hz, 24 bpp
(UXGA: 1600x1200, WXGA: 1366x768
Note: VGA output is not supported on i.MX53 TO1 processors
Table 18-1. Available Interfaces
Feature IPU (in i.MX53)