MBTBUDS WIRELESS BLUETOOTH EARBUDS User guide
USER GUIDE Thank you for purchasing the Macally MBTBUDS. The MBTBUDS is a Bluetooth 4.1 wireless headset, made of the finest materials, that allows you to enjoy your favourite music and make hands-free calls at the best audio quality and the most stable wireless connection up to a distance of 30ft/10 m. This headset supports aptX audio technology for high-quality wireless audio and Cvc 6.0 noise cancelling for a crisp and clean microphone sound.
Charging the MBTBUDS To charge your MBTBUDS simply connect the USB end of the charging cable to a USB charging adapter (adapter not incuded) and the Micro USB end into the MBTBUBS charging port. While charging, the battery status LED will stay solid red and then turn to white when fully charged. • Play/Pause button Press once to answer the incoming call and a second time when you wish to end the call. To ignore the incoming call simply let it ring out.
2. Open the Bluetooth settings on your iPhone and make sure Bluetooth is set to “ON”. Pairing the MBTBUDS with Android smartphone or tablet NOTE: The MBTBUDS may not be fully charged when you get it. Please make sure you charge them If the sync LED does not flash during pairing. 3. From the Bluetooth screen, wait for MACALLY MBTBUDS to show up then tap on “MACALLY MBTBUDS” and wait for the MBTBUDS to show “Connected”. NOTE: It may take up to a minute for the ear buds to show up on the screen.
2. Open the Bluetooth settings on your Android and make sure Bluetooth is set to “ON”. Pairing the MBTBUDS with Mac NOTE: The MBTBUDS may not be fully charged when you get it. Please make sure you charge them If the sync LED does not flash during pairing. 1. Separate the ear buds and make sure the Bluetooth sync LED is flashing red/white. If it’s not, press and hold the sync button on the headset for three to four seconds until it flashes. 3.
3. From the Add a device screen, wait for MACALLY MBTBUDS to show up then double click on “MACALLY MBTBUDS” and wait for windows to finish installing the driver. NOTE: It may take up to a minute for the ear buds to show up on the screen. Once paired the ear buds will automatically turn off when magnetically placed together and automatically turn on and connect to your Windows PC. Pairing the MBTBUDS with Windows NOTE: The MBTBUDS may not be fully charged when you get it.
Warning 1. Listening at high volume levels can lead to hearing problems. 2. For traffic safety, do not use earphones while driving a motor vehicle or bicycle. 3. Keep out of reach of children as the parts included with this product can be a choking hazard. Technical support For tech support please call +1 909 230 6888 or e-mail us at techsupport@macally.com. Tech support hours are from 8:30 AM to 5:30 PM Monday through Friday (Pacific Standard Time).
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
