User guide

SECTION OM – OPERATOR’S MANUAL
Form # 169365 OM-31 Issue – May 2008
4 MAINTENANCE
4.1 RECOMMENDED SAFETY
PROCEDURES
• Park on level surface when possible.
Block wheels securely if windrower is
parked on an incline.
• Follow all safety procedures in Section
G, Paragraph 1, Safety Instructions.
4.2 LUBRICATING THE
TRANSPORTER
4.2.1 Lubricants
LUBRICANT SPEC DESCRIPTION USE
Grease SAE Multi-
Purpose.
High Temp.
Extreme Pressure
(EP). 0-1% Max
Molybdenum
Disulphide (NLGI
Grade 2).
Lithium Complex
Base.
Base Oil Viscosity
of 190-250 CST @
40C.
As Required
Unless
Otherwise
Specified.
4.2.2 Lubricant Storage
a. Use clean containers to handle all lubricants.
b. Store in an area protected from dust, moisture,
and other contaminants.
4.2.3 Greasing Requirements
Refer to Paragraph 4.5 Maintenance Schedule
for lubrication intervals.
a. Remove rubber end cap to expose grease
zerk.
b. Inject grease until bearings are fully packed
with grease.
c. Replace rubber end cap.