Instruction Manual

TOW-BAR

169784 31 Revision A

STEP 16. ASSEMBLE TOW-BAR

CRADLES

The cradle assemblies are designed for your

particular header size and application. Refer to the

appropriate section to assemble the LEFT SIDE

and RIGHT SIDE cradles.

A. LEFT SIDE CRADLE ASSEMBLY

I. WINDROWER 30 FT / COMBINE 30 FT

FLEX / ALL 35 FT RIGID

a. Retrieve cradle (A), extension (B), and support (C)

from kit.

b. Assemble parts as shown with four 3/8 NC X 1.0

LG carriage bolts (D) and flanged smooth face

lock nuts.

c. Tighten hardware.

II. COMBINE 30 FT RIGID

a. Retrieve cradle (E), extension (F), and support (G)

from kit.

b. Assemble parts as shown with four 3/8 NC X 1.0

LG carriage bolts (H) and flanged smooth face

lock nuts.

c. Tighten hardware.

III. COMBINE 35 FT FLEX / ALL 40 – 45 FT

a. Retrieve cradle (J), and support (K) from kit.

b. Assemble parts as shown with two 3/8 NC X 1.0

LG carriage bolts (L) and flanged smooth face

lock nuts.

c. Tighten hardware.