Instruction Manual

LIGHTS

169784 21 Revision A

STEP 11. INSTALL LIGHTS

A. ATTACH LIGHTS

I. ENDSHIELD LIGHT

a. Remove end shield.

b. Remove divider rods (A) (if installed) from storage

location.

c. Remove bolts (B) and remove and bracket (C) on

endsheet. Retain hardware.

d. Remove clip (D) that attaches wiring harness to

endsheet. Retain for re-installation on reel arm.

e. Retrieve light assembly from transport kit.

f. Loosen nuts (E) and remove cover (F) from light

assembly.

g. Reinstall bracket (C) on light cover (F) with

existing hardware (B).

h. Position light (G) on endsheet picking up existing

holes, and install three 3/8 NC X 0.75 LG carriage

bolts (H) and nuts.

i. Do not re-install cover (F) at this time.