Instruction Manual

OPERATION
Repositioning Fore-Aft Cylinders on Double Re el
The reel can be moved approximately 9 in (227 mm) further aft by repositioning the fore-aft cylinders on the reel
arms. To reposition the cylinders on a double reel, follow these steps:
WARNING
Stop windrower engine and remove key before making adjustments to machine. A child or even a pet could
engage the drive.
1. Position reel fully aft with support arms horizontal.
2. Stop engine and remove key.
Reposition center arm cylinder as follows:
NOTE:
Reel components are not shown for clarity.
3. Remove four bolts (A) securing cylinder bracket (B) to
reel arm.
4. Push reel back until bracket (B) lines up with the aft set
of h oles (C).
5. Reinstall the four bolts (A) to secure bracket to reel arm
at new position.
Figure 4.36: Forward Position
Figure 4.37: Rearward Position
169899 62 Revision A