Instruction Manual

SPECIFICATIONS
D65
Guard: Pointed / Forged / D ouble Heat Treated (DHT)
Hold-Down: Sheet Metal / Adjustment bolt
O
F
Guard: Pointed / Forged / C ase Hardened (CH)
Hold-Down: Sheet Metal / Adjustment Bolt
O
F
Guard: Stub /
Forged Bottom / Forged Top / Adjustm ent Plate
O
F
Guard: Stub / Forged Bottom / Sheet Metal Top / Adjustment Bolt O
F
Guard: 4 Point / No-choke Design (2 Long Points with Tangs / 2 Short Points without Tangs) O
F
Guard Angl
e (cutterbar on ground)
Center-Link Retracted 15–25 ft.
7.5 Degrees
S
Center-Link Retracted 30–40 ft.
2.5 Degre
es
S
Center-
Link Extended
15–25 ft
.
17.0 De gree s
S
Center-Link Extended 30–40 ft.
12.0 De gree s
S
CONVEYOR (Draper) and DECKS
Draper Width
41-5/
8 in. (1057 mm)
S
Draper Drive Hydraulic
S
Draper Speed 0–742 fpm (225 m/min.) S
15 f
t.
60-
5/8 – 69-11/16 in.
(15
40–1770 mm)
S
Delivery Opening Width (Center Delivery) / Variable by
Shifting De cks
20, 25, 30,
35, 40 ft.
67-1/8–76-11/16in.
(1720–1950 mm)
S
Center-Link
Fully
Retracted
37-5/8 in. (955 mm)
S
Delivery Opening Height (under Frame Tube at 8 in.
Cutting Height )
Center-Link
Fully
Extended
43-1/2 in. (1105 mm)
S
PR15 PICK-UP REEL
Quantity of Tine Tubes
5, 6, or 9
15 to 30 ft. 8 in. (203 mm)
Center Tube Diameter
35 ft. 10 in. (254 mm)
Factory Set 31-1/2 in. (800 mm)
Finger Tip Radius
Adjustment Range
30-3/16 – 31-1/2 in.
(766–800 mm)
Effective Reel D ia m eter (Via Cam Profile) 65 in. (1650 mm)
Finger Length
11 in. (290 mm)
Finger Spacing (Staggered on Alternate Bats) 6 in. (150 mm)
Reel Drive Hydraulic
S
Reel Speed (Auto-Adjust from Cab Using Ground Speed Index)
0–85 rpm
S
FRAME and STRUCTURE
169899 30 Revision A