Instruction Manual

3 Specifications
| D65 | Attachments
S: standard /
O
F
: optional (factory installed) / O
D
: optional (dealer installed) / -: not available
D65
CUTTERBAR
Effective cutting width (distance between crop divider points)
15 ft. header 15.00 ft. (180 in. [4572 mm]) S
20 ft. hea
der
20.00 ft.
(240 in. [6096 mm])
S
25 ft. header 25.00 ft. (300 in. [7620 mm]) S
30 ft. header 30.00 ft. (360 in. [9144 mm]) S
35 ft. he
ader
35.00 ft
. (420 in. [10,668 mm])
S
40 ft. header 40.00 ft. (480 in. [12192 mm]) S
Cutterbar Lift Range at Guard Tip (Center-Link Fully
Retracted)
49-13/16 in. (1265 mm)
Knif
e
Single Knife Drive: One hydraulic motor with V-belt to one heavy duty (MD) knife drive box O
F
Double Knife Drive 15–35 ft. (timed): One hydraulic motor w ith two cogged belts to two heavy
duty MD k nife driv e boxes
O
F
Do
uble Knife Drive 40 ft. (untimed): Two hydraulic motors with banded-belts to two heavy duty
(M
D) knife drive boxes
O
F
Knife Stroke 3 in. (76 mm) S
20, 25 ft.
1
200–1400
S
3
0 ft.
1200–1400
S
35 ft.
1100–1300
S
Single Knife Speed (strokes per minute)
40 ft.
1050–1200
S
15 ft.
1500–1900
S
20, 25 ft.
1400–1700
S
30 ft.
1200–1600
S
35 ft.
1200–1400
S
Double Knife Speed (strokes per minute)
40 ft.
1100–1400
S
Knife Sections
Over-serrated / Solid / Bolted / 9 serrations per inch O
F
Over-serrated / Solid / Bolted / 14 serrations per inch O
F
Knife Overlap at Center (Double-Knife Headers) 1/8 in. (3 mm) S
Guards and Hold-Downs
169899 29 Revision A