Instruction Manual

SAFETY

1.9 Interpreting Safety Signs

In the safety sign explanations below, (a) refers to the top or

left position panel, (b) refers to the bottom or right position

of the safety decal depending on decal orientation.

NOTE:

If there are more than two panels in a decal, the lettering

will continue downward or to the right, depending on

decal orientation.

1. MD #113482

a. General hazard pertaining to m achine operation

and servicing

b. CAUTION

To avoid injury or death from improper or unsafe

machine operation:

• R ead the operator ’s manual and follow all safety

instructions. If you do not have a manual, o btain

one from your Dealer.

• D o not allow untrained persons to operate

the machine .

• Review safety instructions with all

Operators e very year.

• Ensure that all safety signs are installed

and legible.

• M ake certain everyone is clear of machine

before starting engine and during operation.

• Keep riders off the machine.

• Keep all shields in place, and stay clear of

moving parts.

• D isengage header drive, put transmission in

Neutral, and wait for all movement to stop

before leaving operator’s position.

• Shut down the engine and remove the key from

ignition before servicing, adjusting, lubricating,

cleaning, or unplugging machine.

• Engage safety props to prevent lowering of

header or reel before servicing in the raised

position .

• Use slow m o ving vehicle emblem and ﬂashing

warning lights when operating on roadways

unless prohibited by law.

Figure 1.26: MD #

113482

169899

Revision A