Instruction Manual

MAINTENANCE AND SERVICING
2. For DOU BLE REEL DRIVE, position th e lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
Figure 6.255: Double Reel Drive Cover
6.9.6 Adjusting Reel Drive Chain Tension
Removing Drive Cover
1. Remove th
e reel drive cover (A) as follows:
a. For SINGL
E REEL DRIVE, remove the four
bolts (B)
that secure the cover (A) to the reel drive.
b. For DO
UBLE REEL DRIVE, remove the six
bolts
(B) that secure the upper cover (A) to the
reel d
rive and to the lower cover (C).
NOTE:
The l
ower cover (C) may also be removed by
taki
ng off the three bolts (D).
Figure 6.256: S ingle Reel
Fig
ure 6.257: Double Reel
169899 240 Revision A