Instruction Manual

MAINTENANCE AND SERVICING
Tightening Drive Chain
1. Ensure the six bolts (B) securing motor mount to chain
case are loose.
2. Slide motor and motor mount upwards until chain (A)
is tight, and tighten bolts (nuts on backside).
3. There s hould be 1/8 in. (3 mm) of slack in the chain.
Adjust if necessary.
4. Torque bolts (B) to 54 lbf·ft (73 N·m).
Figure 6.2
47: Reel Drive
Installin
g Drive Cover
1. Position the lower cover (C) first (if removed) and
secure with three b olts (D).
2. Install upper cover (A) using the six bolts (B).
Figure 6.248: D ouble R eel Drive Cover
169899 237 Revision A