Instruction Manual

MAINTENANCE AND SERVICING
Installing Reel Drive Motor
To install the reel drive hydraulic motor, follow these steps:
1. Slide motor mount (A) up or down so that mounting
holes are accessible through openings in chain case.
2. Attach motor (B) and spacer (C) to motor mount with
four 1/2 in.x 1.75 countersunk bolts (D).
3. Secure motor with lock nuts (E).
4. Torque nuts to 54 lbf·ft (73 N·m).
5. If in stalling new motor, install fitting s (F ) from o ld m otor
onto new motor.
Figure 6.231: Reel Drive Motor
A-Motor
Mount
B-Hydra
ulic Motor
C - Spacer
D - Bolts E - Lock Nuts F - Hydraulic Fittings
6. Reattach hydra
ulic lines (A) to motor (B).
Figure 6.232: Reel Drive
169899 231 Revision A