Instruction Manual

MAINTENANCE AND SERVICING
Loosening Drive Chain
1. Loosen nuts (A). Slide motor (B) and motor mount (C)
down to wards ree l shaft.
Figure 6.2
26: Reel Drive
Removing D
rive Sprocket
1. Remove the drive c hain (A) from the drive sprocket (B).
Figure 6.227: Reel Drive
2. Remove the cotter pin (A), slotted n ut (B), and flat
washer (C) from the motor shaft.
3. Remove the drive sprocket (D). Ensure key re mains in
the shaft.
IMPORTANT:
Do NOT use pry bar and/or hammer to remove drive
sprocket (D). This will damag e the motor. Use a pu ller if
drive sprocket does not come off by hand.
Figure 6.228: Reel Drive
169899 229 Revision A