Instruction Manual

MAINTENANCE AND SERVICING

Removing Drive Cover

1. Remove the six bolts (B) that secure the upper cover

(A) to the reel drive and to the lower cover (C).

NOTE:

The lower cov

er (C) may also be removed by

taking off th

e three bolts (D).

Figure 6.2

16: Double Reel

Removing D

ouble Reel U-Joint

To remove the U-joint, follow t hese steps.

1. Support inboard end of right reel with a front end loader

and nylon slings (or equivalent setup).

IMPORTANT:

To avoid

damaging or denting center tube, support reel

as close

as possible to the end disc.

Figure 6.217: Supporting Reel

2. Remove four bolts (A) attaching reel tube to U-joint

ﬂange (B) and move reel sideways to disengage stub

shaft from U-joint.

Figure 6.218: U-Joint

169899 225 Revision A