Instruction Manual

MAINTENANCE AND SERVICING

Loosening Drive Chain

1. Loosen nuts (A). Slide motor (B) and motor mount (C)

down towards reel shaft.

Figure 6.2

08: Reel Drive

Removing D

rive Sprocket

1. Remove the drive chain (A) from the drive sprocket (B).

Figure 6.209: Reel Drive

2. Remove the cotter pin (A), slotted nut (B), and ﬂat

washer(C)fromthemotorshaft.

3. Remove the drive sprocket (D). Ensure key remains in

the shaft.

IMPORTANT:

Do NOT use pry bar and/or hammer to remove drive

sprocket (D). This will damage the motor. Use a puller if

drive sprocket does not come off by hand.

Figure 6.210: Reel Drive

169899

Revision A