Instruction Manual

MAINTENANCE AND SERVICING
Tine Tube Support (If installed) Bushings
20. Position bushing halves (B) on tine tube with flangeless
end adjacent to reel arm, and locate lug in each
bushinghalfinholeintinetube.
21. Slide support (C) onto bushing (B). For the opposite
tine tube, rotate support (C), or slightly move tine tube,
so that it clears channels (D).
Figure 6.194: Support
Figure 6.195: Opposite Support
22. Instal
l bushing clamp (A) onto tine tube adjacen t to
flangel
ess end of bushing (B).
23. Positi
on clamp (A) on bushings (B) so that edg es
of cla
mp and bus hing are flush when clamp fi ts into
groov
e on bushing and lock tabs are engaged.
Figure 6.196: Bushing Clamp
169899
2
17
Revision A