Instruction Manual

MAINTENANCE AND SERVICING
17. Tighten clamp (A) with modified channel lock pliers (B)
so that finger pressure will NOT move clam p.
IMPORTANT:
Over-tighten ing clamp may result in breakage.
Figure 6.192: C lamp Tool
18. At the center disc, install the b olt s (A) securing arm (B)
to disc.
19. At the tail end, install reel arm (B) and endshield
support (C) at applicable tine tube location with bolts
(A). Re-install en ds hie ld s.
NOTE:
There are
no endshields on the center discs.
Figure 6.193: Tail End
169899 216 Revision A