Instruction Manual

MAINTENANCE AND SERVICING

6. Tighten clamp (A) with modiﬁed channel lock pliers (B)

so that ﬁnger pressure will NOT move clam p.

IMPORTANT:

Over-tighten ing clamp may result in breakage.

Figure 6.186: C lamp Tool

7. Line up tin e bar (B) with cam arm an d install bolt (A).

Torque bolt to 120 ft·lbf (1 65 N ·m).

Figure 6.187: Cam End

8. At th e center disc, install t he bolts (A) securing arm (B)

to disc.

9. At the tail end, install reel arm (B) and endshield

support (C) from the tail end of the reel at applicable

tine tube location with bolts (A).

NOTE:

There

are no endshields on the center discs.

Figure 6.188: Tail End

169899

Revision A