Instruction Manual

MAINTENANCE AND SERVICING

17. Slide support (A) off of the bushing halves (B).

NOTE:

Two tine tubes h

ave supports that are assembled

opposite to wh

at is shown. Those supports (A) can be

rotated for th

e ﬂange to clear the channels before they

canbemovedof

f the bushing. The tine tube can a lso

be moved outw

ard slightly.

18. Remove the bushing halves (B).

Figure 6.181: Support

Figure 6.182: Opposite Support

Installing Bushings on 5-, 6- or 9-Bat Reels

WARNING

To avoid bodily injury from fall of raised reel, always engage reel safety props before going under raised

reel for any reason.

IMPORTANT:

Ensure tine tube is supported at all times to prevent damage to the tube or other components.

169899

Revision A