Instruction Manual

MAINTENANCE AND SERVICING
IMPORTANT:
Ensure tine tube is supported at all times to prevent damage to the tube or other components.
1. Slide ne w tine
s and reel arm (A) onto end of tube.
2. Install t ine t
ube b ushings. Ref er to 6.8.5 Tine Tube
Bushings, pag
e207.
3. Attach tines
to tin e bar with bolts and nuts (B).
Figure 6.164: Tine Tube
Removing Plastic Fingers
WARNING
To avoid bodily injury from fall of raised reel, always
engage reel safety props before going under raised
reel for any reason.
1. Re mo ve screw (A) with a Torx
®
Plus 27 IP
socket wrench.
Figur
e 6.165: Removing Finger
2. Push finger top clip back toward reel tube and remove
from finger tube.
Fig
ure 6.166: Removing Finger
169899 206 Revision A