Instruction Manual

SAFETY
1.7 Safety Signs
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or
become illegib le.
• If original parts on which a safety sign was installed are
replaced, be sure the repair part also bears the c urrent
safety sign.
• Safety signs are available from your Dealer
Parts Department.
Figure 1.16: Operator’s Manual Decal
1.7.1 Installing Safety Decals
To instal
l a safety decal, follow these steps:
1. Clean and
dry the installation area.
2. Decide on
the exact location before you remove the decal backing paper.
3. Remove t
he smaller portion of the split backing paper.
4. Place th
e sign in position and slowly peel back the remaining paper, smoothing the sign as it is applied.
5. Prick sm
all air pockets with a pin and smooth out.
169899 9 Revision A