Instruction Manual

SAFETY
1.4 Maintenance Safety
To ens ure your safety while ma intain in g the machin e:
• Review the operator’s m anual and all safety items
before operation and/or maintenance of the machine.
• Place all controls in Neutral, stop the engine, set
the park brake, remove the ignition key, and wait for
all moving parts to stop before servicing, adjusting,
and/or repairing.
• Follow good shop practices:
– Keep service areas clean and dry
– Be sure elec trical outlets and tools are
properly grounded
– Use adequate lighting for the job at hand
Figure 1.8: Safety Around Equipment
• Relieve pressu re from hydraulic circ uit s be fore servicing
and/or disconnecting the machine.
• M ake sure all components are tight and that steel lines,
hoses, and couplings are in good condition before
applying pressure to a hydraulic system..
• Keep hands, feet, clothing, and hair away from all
moving and/or rotating parts.
• Clear the area o f bystanders, especially children, when
carrying out any maintenance and repairs or when
making any adjus tments.
• Install transport lock or place safety stands under the
frame before working under the header.
• If more than one person is servicing the m achine at the
sametime,beawarethatrotatingadrivelineorother
mechanically driven component by hand (for example,
accessing a lube fitting) will cause drive components in
other areas (belts, pulleys, and knife) to move. Stay
clear of driven components at all times.
Figure 1 .9: Eq
uipment NOT Safe for Children
•Wearprotectivegea
r when working on the machine.
• Wearheavyglovesw
hen working on knife components.
Figure 1.10: Saf
ety Equipment
169899 6 Revision A