Instruction Manual

HEADER ATTAC HMENT/D ETACHMENT
5.2 Detaching Header from Windrower
To detach the header from the windrower, follow
these steps :
1. Fully lowe r the reel.
2. To disconnect the reel hydraulics, push in lock
button (A) and pull handle (B) to disengage
multi-coupler (C) from header receptacle.
3. Route hose b un dle b ack onto windrower and store
multi-coupler (C) on hose support.
Figure 5.8: Reel Hydraulics
4. Close cover on header receptacle (A).
Figure 5.9: Close Cover
5. To disconnect header drive hydraulics, disengage and
rotate lever (A) counterclockwise to fully up position.
6. Disconnect electrical connector from header.
Figure 5.10: Header Drive Hydraulics
169899 110 Revision A