Instruction Manual

OPERATION
CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
1. Pull handle (B) up to release and raise the linkage (A)
fully upward in the vertical support.
2. Raise header fully, stop engine, and remove key from
ignition. E ngage header safety props.
Figure 4.85: Raising Linkage
3. Remove hai
r pin and clevis pin (A).
4. Pull latc
h handle (B) to release suspension linkage (C)
and pull s
uspension linkage (C) awa y from spindle (D).
5. Slowly lo
wer the wheels.
Figure 4.86: Lowering Wheels
6. Lower h
andle (B) to lock.
Figure 4.87: Locking Linkage
169899 97 Revision A