Instruction Manual

OPERATION
5. Align lift hook (A) with lu g (B) and lift wheel assembly
to engage pin in hook (A). Ensure latch (C) is engaged.
6. Install clevis pin (D) and sec ure with hairpin to center
of axle.
Figure 4.78: Front (Left) Wheels
7. Lift wheel assembly to desired height and slide
linkage (A) into appropriate slot in vertical support.
8. Push down on handle (B) to lock.
Figure 4.79: Front (Left) Wheels
Moving Rear (Right) Wheels into Field Position
To move
the rear (right) transport wheels into field position, follow these steps.
1. Pull pi
n (A) on the left hand wheel behind the header.
Swive
l wheel clockwise and lock with pin (A).
Figure 4.80: Left Rear Wheel
169899 94 Revision A