User Manual

SECTION 7 MAINTENANCE AND SERVICING
169000 / 169040 177 Revision E
7.18.1.3 Maintenance Record: Self-Propelled
Self-Propelled Windrower Header
ACTION:  - Check  - Lubricate  - Change
MAINTENANCE
RECORD
Hour Meter Reading
Date
Serviced By
BREAK-IN
Refer To Section 7.18.1.1 Break-In Inspection: Self-Propelled
100 HOURS OR ANNUALLY

Conditioner Drive Gearbox Lube Level

Wheel Hub Bearings

Sickle Drive Box Bolt Torque

Sickle Drive Box Lubricant Level
END OF SEASON
Refer To Section 6.19 STORAGE
10 HOURS OR DAILY
NOTE: A RECORD OF DAILY MAINTENANCE IS NOT
NORMALLY REQUIRED BUT IS AT T HE
OWNER/OPERATOR’S DISCRE TION .

Auger Drive Chain (except A40-D)

Hydraulic Hoses and Lines

Hydraulic Oil Level

Reel Drive Chain (except A40-D)

Sections, Guards and Hold-downs

Sickle Assembly

Sickle Drive Box Bolt Torque -
First 10 Hours Only
25 HOURS

Sickle Head
50 HOURS

Auger Drive Jackshaft Bearings (except A40-D)

Auger Shaft Bearings

Gauge Roller Bearings

Main Driveshaft Bearings

Tine Bar Bearings (A40-D)

Reel Shaft Bearings

Conditioner Gearbox Oil - First 50 Hours Only

Conditioner Universal Shafts

Roll Pivots

Conditioner Shaft Bearings

Sickle Drive Cross-Shaft

Sickle Drive Box Oil - First 50 Hours Only
1000 HOURS OR 3 YEARS

Conditioner Drive Gearbox Lubricant

Sickle Drive Box Lubricant