User Manual

SECTION 7 MAINTENANCE AND SERVICING
169000 / 169040 107 Revision E
II. A30-D Headers
REEL SHAFT BEARING (1 PLC)
A30-D HEADER RH SIDE
High Temperature Extreme Pressure
(EP2) Performance With 1% Max
Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
SICKLE DRIVE BEARING (1 PLC)
AUGER SHAFT BEARING (1 PLC)
NOTE
To prevent binding and/or
excessive wear caused by sickle
pressing on guards, do not
over-
grease. If more than 6 to 8 pumps
of grease gun are required to fill
the cavity, replace the seal in the
sickle head.
SICKLE HEAD BEARING (1 PLC)