Specifications

47
FEATURES AND BENEFITS
DKHB DISC HEADER
Knives
Several versions of knives can be ordered
through AGCO Service Parts to contend with
different crop conditions. The standard knife on
the DKHB header is the 18° bottom bevel.
Four styles of knives are available:
11° Top Bevel – Provides a good quality of cut
in most crops and conditions, but if the knife is
deflected down, tends to cut into cutterbed.
11° Combination Bevel – One side is bottom
bevel, and the other is top bevel. Can be used
to compare the quality of cut between the two
styles of bevel.
11° Bottom Bevel – Good quality of cut, pro-
vides some rock protection, as if knife is de-
flected, it doesn’t tend to dig into the cutterbed.
The knife also tends to stay sharper longer.
18° Bottom Bevel – Provides additional lift in
down or light crop conditions. Because of the
higher lift, the 18° take more power than the 11°
knife.
Important: Only install approved AGCO Service
Parts as replacements on the header.
Knives
SERVICE PARTS