Specifications

43
FEATURES AND BENEFITS
DKHB DISC HEADER
Hydraulic Header Tilt
The header tilt cylinder regulates the header
angle from 0° up to 10°. For normal operation, a
0 to 4° header tilt angle is used. A steeper an-
gle can be used when cutting down or rank
crop. But in the steeper cutting angles, the cut
will be wavier. The hydraulic tilt allows the op-
erator to change the header tilt from the cab,
better matching field conditions for increased
performance.
Header Walkway
A walkway (1) has been built into the header,
and made non-slip by adding two friction strips.
The header walkway and hand rails (2) on the
cab to hold on to, provide improved access to
the cab windows, making them easier to clean.
Header Lift Cylinder Stop
The header lift cylinder stop is engaged by one
lever, which activates a stop on each lift cylin-
der. The single lever is easy to engage. The
stop holds the header lift cylinders extended
when engaged, and has a spring to hold the
stops away from the cylinder when disengaged.
The header lift cylinder stop is effective and
easy to use, to securely hold the header in
place for service.
Header Tilt
Header Stop
Header Walkway