Specifications

41
FEATURES AND BENEFITS
DKHB DISC HEADER
Curtain Magnet Open
Windrow Forming Shields
Header Drive
The cutterbar is driven by a hydraulic motor on
each end of the header. This equalizes the
torque load across the entire cutterbar, for
longer life. The header speed can be adjusted
separately from the engine speed, from 0 to
2600 rpm. The engine speed can be reduced
while still maintaining full cutterbar speed,
maximizing fuel efficiency. The dual header
drive spreads the torque load and the header
speed is adjustable, for a more efficient ma-
chine in both design and function.
Cutterbar Shield Curtains
The cutterbar shield curtains are held together
with magnetic catches. The catches hold the
curtains together, to keep material from flying
from under the cutterbar. The magnets make
latching easy and secure. The cutterbar shield
curtains held together with magnetic catches
form a ring around the cutterbar for security,
but are easily unlatched for easy cutterbar ser-
vice.
Forming Shields
The forming shields can be set to operator’s
preference. The adjustable rear deflector shield
slows crop momentum to allow it to fall gently
into a tall, fluffy, quick drying windrow. The
forming shields can be set to build a windrow
any way the operator desires, so crop can be
harvested with minimum delay.
Header Drive
Curtain Magnet Latched