Owner manual

Form # 147069 Issue 09/06

JOHN DEERE

–

60 SERIES COMBINE

Adapter Mounting Instructions

for John Deere Combines

PREPARING THE COMBINE

1. 60 series Combines:

Loosen and remove bolt at (H). Remove washer and

discard. Ensure spacer (not shown) behind washer

remains in place. Loosely re-install bolt at (H) through

new torque arm bracket.

Remove nut (J) and install bottom of torque arm

bracket over bolt at bottom of feeder house. Tighten

and torque bolt (H) and nut (J) to 160 ft-lbs.