User guide

45
Adapter Mounting Instructions
for Case IH Combines
PREPARING THE ADAPTER
1. Install feeder house support (C) (from adapter
package) onto the adapter frame with one
1/2 x 1 flange bolt at (D) and three 1/2 x 1
carriage bolts and flange nuts at (E). Repeat at
other side.
NOTE: For attachment to top beam, engage
carriage bolts in keyhole slots.
2. Attach filler (F) with one 1/2 x 1¼ carriage bolt
and flange nut. Repeat at other side.
NOTE: Filler (F) shown is for 60 & 66 Series
Combines. A similar, shorter piece is used with
the mid size deck used with 80 & 88 Series
Combines
3. Install lower latch pivot bars (B) in adapter
frame. Ensure pivot pin is installed inside frame
in high position as shown.
D
E
C
F
B
INSTALL ADAPTER COMPLETION PARTS