User Manual

20
MAINTENANCE/SERVICE
GREASING THE ADAPTER (continued)
100 Hours or Annually:
1. Cross Auger Bearing (B) - one fitting
2. Feed Draper Idler Roller Bearings (C) -
two fittings
Replace bearings every 500 hours or annually.
3. Feeder Draper Drive Roller Bearing (D) -
one fitting
NOTE: To avoid damage to bearing seal, when
greasing drive roller bearing use a single slow
stroke of grease gun.
Replace bearing every 500 hours or annually.
CROSS AUGER BEARING
B
FEEDER DRAPER IDLER ROLLER BEARINGS
C
FEEDER DRAPER DRIVE ROLLER BEARING
D