Owner's manual

SPECIFICATIONS

DIMENSIONS

12 FT. 14 FT. 16 FT.

Overall Width:

Transport Position 13.5 ft. (4103 mm) 15.5 ft. (4713 mm) 17.5 ft. (5323 mm)

Field Position 18.1 ft. (5531 mm) 21.1 ft. (6446 mm) 24.1 ft. (7360 mm)

Overall Length:

Transport Position 20.7 ft. (6320 mm) 22.1 ft. (6740 mm) 24.9 ft. (7573 mm)

Field Position 15.8 ft. (4816 mm) 16.3 ft. (4975 mm) 18.2 ft. (5557 mm)

Overall Height

Transport Position 6.2 ft. (1896 mm)

Field Position 6.2 ft. (1896 mm)

Weight 5900 lbs. (2675 kg) 6250 lbs. (2835 kg) 6623 lbs. (3005 kg)

CUTTERBAR

Cutterbar Width 12.25 ft. (3734 mm) 14.25 ft. (4343 mm) 16.25 ft. (4953 mm)

Cutting Height (on skids) 1.5 to 4 in. (38 to 100 mm)

at 8° guard angle

Guard (Header) Angle (adjustable) 6° to 11.5° below horizontal

Cutterbar Range 2.0 in. below ground to 21 in. above ground

at 8° guard angle (to guard tip) (-50 mm to +533 mm)

MAIN DRIVE

540 or 1000 RPM PTO tractor driven pump

to hydraulic motor driving primary shaft

Rear Countershaft Speed 1156 RPM *

SICKLE

Drive Type Belt driven wobble box (enclosed oil bath)

Speed 1560 strokes or 780 cycles per minute *

Stroke 3 in. (76 mm)

Sections Over-serrated, low shoulder

Guards Double heat treated, forged steel

REEL

Drive Type V-belt drive from R/H auger shaft

to chain final drive

Reel Type 5 bats (4 or 6 bats optional),

replaceable steel pick-up tines,

cam action, polymer tine tube bearings

Radius 22 in. (1560 mm) to finger tip

Speed 72 RPM as assembled / 59 RPM with

pulley exchange / 66 RPM optional *

NOTE: Specifications listed only under 14 ft. column are common to all sizes.

* All speeds are in no-load condition at rated tractor RPM.