User's Manual

Your Droid marker has been CNC milled from a solid billet of 6061 aircraft

grade aluminium, representing the highest quality workmanship available in

aluminium manufacturing. The milling has been performed by a 3D surfacing

machine, with each marker taking many hours to produce.

Please take the time to learn the parts of your Droid, it will help you when read-

ing this manual.

Numbered basic parts as shown in the gure on the left:

1. Matchstik 2 piece barrel

2. Feed clamp lever (used to afx your loader)

3. Feed clamp adjuster screw

4. Top locating screw (must be removed before disassembly of the drive train

5. Eye cover and screw (covering the beam sensor used to detect paintballs)

6. End cap

7. On/Off switch

8. Indicator LED

9. Wrap around grip (covering the battery and electronics)

10. Venting ASA (used to attach your preset air system)

11. Venting ASA on/off cap (used to turn the air on or off)

12. Straight push-t hose tting

13. Air hose

14. 90 degree swivel push-t hose tting

15. Velocity adjustment screw

16. Inline regulator (Gladiator reg)

17. Vertical ASA

18. Feed Tube

Contents

Know your Droid

Quick Setup

Using your Droid

Advanced Setup

Maintenance

Parts List

Troubleshooting