User's Manual
Introduction
Thank you for purchasing an 07 Cyborg marker. This users manual will give you a
guide to setting up, tuning and maintaining your marker. Please read it thoroughly
to ensure you get the best out of your Cyborg.
The 07 Cyborg is a very high performance paintball marker. When operated cor-
rectly, it can achieve speeds and efeicency greater than any other marker previ-
ously produced.
Specications
Operation Electro-pneumatic
Electronics MacDev 07 Custom
Solenoid 5V, 5 way
Power Source 9V
Weight (incl Barrel) 1lb 14oz
Length/Height/Width 9.5”/8.2”/1.1”
Max Rate of Fire Unlimited
Paint Sensor Visible break-beam
Propellant Compressed air/nitrogen ONLY
Operating pressure (HPR) 200psi
Cycling pressure (LPR) 65psi
Efciency (approx) 1900 shots/68cu4500psi ll
Barrel threads AutoCocker
Calibre 0.68”
Barrel MatchStik 14”, 0.689 bore 2 piece
Lubricant Dow 55 or Dow 33
Proudly designed and manufactured in Australia
14
3
Accessories
Use genuine MacDev accessories or factory approved aftermarket upgrades for
best results. For the latest list of approved aftermarket products visit www.macdev.
net
Rebuild Kit
The Cyborg rebuild kit contains all the most important parts of your Cyborg. This
kit is good for peace of mind, especially when entering an important tournament.
LegionAir Air/Nitro System
The LegionAir air/nitro system is the highest quality compressed air delivery
system available. The legionAir will deliver high volume, clean consistent air
to your Cyborg in a lightweight compact unit - the ultimate accessory to your
Cyborg.
MatchStik Kit
Your Cyborg was supplied bundled with a 2-piece MatchStik barrel. Own the full
kit to allow good paint to barrel match with the barrel designed for your Cyborg.
Ram Gauge
Check your LPR precisely for creep and recharge problems. Takes the guesswork
out of tuning.