MacDev 2004 Find us on the web at: www.macdev.net Please post warranty cards to: Users Manual Australia/New Zealand MacDev PO Box 584 Gymea, NSW AUSTRALIA 2227 USA/Canada Europe Paintball Kingdom 2407 Ansonville Rd Marshville NC USA 28103 OPB Sandgärdsgatan 20 352 30 Växjö SWEDEN Mac Developments - Australia www.macdev.net Info@macdev.
Cyborg Limited Factory Warranty The Cyborg marker is covered by the MacDev 12 month warranty against manufacturing defects. The Cyborg is guaranteed free of manufacturing defects for a period of twelve (12) consecutive months beginning immediately after purchase from a registered Cyborg retailer. If a manufacturing defect is detected, the defective part will be either repaired or replaced at no cost to the owner.
MacDev 2004 Find us on the web at: www.macdev.net Please post warranty cards to: Australia/New Zealand MacDev PO Box 584 Gymea, NSW AUSTRALIA 2227 USA/Canada Europe Paintball Kingdom 2407 Ansonville Rd Marshville NC USA 28103 Introduction The Cyborg is an open bolt, electropneumatic marker designed specifically for accuracy and speed. The Cyborg is built from precision machined components manufactured on some of the most sophisticated computer controlled machinery in the world today.
Getting Started Accessories Your Cyborg requires a source of Compressed air to be installed before use. The best air system to use with your Cyborg is the Conquest air system. However, thanks to the 04 Gladiator inline regulator, your Cyborg can accept air input from any air system supplying 400-900psi of compressed air (DO NOT USE CO2). Use genuine MacDev accessories or factory approved aftermarket upgrades for best results. For the latest list of approved aftermarket products visit www.macdev.
Troubleshooting Setting the Velocity Some common difficulties are detailed in this section, for the latest troubleshooting information, please visit www.macdev.net. If you require more assistance with troubleshooting related issues, please contact your local macdev/Cyborg tech. Your Cyborg has been factory set to between 275 and 300fps. The Cyborg should be adjusted to comply with local legal velocities. The Cyborg velocity can be adjusted over the chronograph using a standard 1/8” allen wrench.
Fine Tuning and Customising your Cyborg Your Cyborg can be adjusted in many ways to suit your individual playing style. You can adjust the trigger feel, sensitivity and speed. Trigger Adjustment There are 3 set screws around the trigger area to use for fine tuning the trigger. The lower screw on the front of the trigger is used to adjust the length of the trigger pull - screw it clockwise to reduce the trigger pull length.
Caring for your Cyborg The Cyborg is a very low maintenance marker, however there are some things that you can do to keep it running at optimum performance. Always use Dow 33 to lubricate your Cyborg, do not use Silicone spray or oil of any kind. Bolt Maintenance The Cyborg bolt is made from a very high quality self lubricating plastic. For this reason the bolt should always be used dry - never lubricate the bolt. During normal usage, the Cyborg bolt can become dirty.
Cyborg Schematic This schematic does not show all Cyborg parts. Some parts have been omitted for clarity.
