User`s manual

How to start

1. Put two (AA) Alkaline batteries in the keyboard battery compartment (located underneath).

Be sure to follow the “+” and “-”polarity mark inside.

2. Plug the receiver to any available USB port on your computer and the power LED will turn on.

3. Make sure your keyboard and receiver distance is within 2 feet initially then gradually increase

the distance to place where you desire as long as you can get reliable connection between

RFKey and Receiver. The effective distance is 3’-4’ max.

How to synchronize

You may need to do the RF synchronization between RFKey and receiver for first time use;

users may need to re-synchronize RFKey and receiver after replacing the batteries. or

experience RF connection problem

To synchronize

1. Press the “CONNECT” button on the RECEIVER. The “ACCESS” LED will begin flashing for up

to 10 seconds signaling that it is in stand by mode to wait for the keyboard to send the ID code.

2. Use a pointed object such as pen to press the “CONNECT” button on the KEYBOARD, which

is located underneath, for 1 second and release. The receiver’s “ACCESS” LED will stay on for

3 seconds then turns off. The ID setting process is completed and the keyboard is ready to use.

3. The ACCESS LED will blink while you are using the keyboard.