User`s manual

Introducing IEEE 1394B FireWire/SuperSpeed USB3.0

2.5" Hard Drive Enclosure-PHR-S250U3B

Thank you for choosing the PHR-S250U3B portable IEEE 1394B FireWire/

SuperSpeed USB2.0 2.5" Hard Drive Enclosure. This portable size enclosure

supports 2.5” SATA Hard drive. It is simple to install and comes with all the

parts you need to create a external IEEE 1394B FireWire/

SuperSpeed USB3.0 device.

About This Guide

Before you begin using the PHR-S250U3B, be sure to read this manual in its

entirety.

This guide contains:

• Introducing IEEE 1394B FireWire/SuperSpeed USB3.0

2.5" Hard Drive Enclosure

• Hardware Installation

• Software Installation

System Requirements

For Mac

• Any Macintosh desktop or NoteBook computer with USB or

FireWire port ready

• MasOS X

For PC

• Pentium II or compatible Desktop or Notebook with USB or

IEEE 1394B FireWire port ready.

• WindowsXP, Windows Vista and Windows7

• USB3.0 port is required for SuperSpeed USB3.0 transfer speed

Using AC/DC Adapter (optional)

Basically, if you connect the PHR-S250U3B directly into built-in FireWire

or USB port, AC/DC adapter is not required. However

(1) if USB connection does not response, or USB port is disabled due

to power surge error message

(2) the PHR-S250U3B Enclosure is connected to a CardBus to

FireWire host adapter, or 4-pin iLink port AC/DC adapter is required.