User`s manual

For USB Connection
1. I have plugged in NetDisk to my USB port and cannot see NetDisk in
My Computer.
First double check Jump setting in the hard drive, it should be set to Master
made in IDE drive and single Master for Western Digital hard drive. Please
plug NetDisk into a different USB port on your PC, or try using different USB
cable.
With Windows 2000/XP and MAC, NetDisk uses the Operating System’s
built-in USB drivers, therefore, no additional software is necessary. Please
make sure that NetDisk is formatted to the supported files system to meet
requirement of your network environment.
2. My NetDisk shows up as a Black dot when used with USB.
When used with USB mode you will see a black dot (disconnected from net-
work) in the system tray as that is an indicator for NDAS (Ethernet) mode.
For Mac Connection
1. Dose NetDisk support new Intel-base Macintosh computer?
Current driver dose not support Intel-based Macintosh computer yet. We will
post new driver in our website when it is available.
2. Why is only one Mac allowed to write to NetDisk at a time, and all
the rest of computers need to be mounted as Read-Only first?
It is designed to prevent data corrupt; we suggest you assign Read/Write
only to single Mac computer which uploads (write) to NetDisk most often,
the rest of computers can download (Read) only. If other computer needs to
upload, please pass the write access permission manually. Never force to
take write access without being accepted by other computers first.
37