IEEE1394A FireWire/Hi-Speed USB2.0 3.
© Copyright 2005 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of Part.
CONTENTS IMPORTANT: PLEASE READ BEFORE USING ENCRYPT KEYS! 4 INTRODUCING FIREWIRE/USB2.
IMPORTANT: Please Read Before Using Encrypt Keys! Please read it thoroughly before using PHR-100ACE encrypt enclosures, and save this note for future reference use. 1. For security purposes, the encrypt keys cannot be duplicated. Without the matching encrypt key, your data in the hard disk cannot be accessed. Please keep the keys in a safe place. 2. Each encrypt enclosure comes with a unique pair of keys.
Introducing IEEE1394A FireWire/Hi-Speed USB2.0 3.5" Hard Drive Data Encrypt Enclosure-PHR-100ACE Thank you for choosing the PHR-100ACE aluminum IEEE1394A FireWire/Hi-Speed USB2.0 3.5" Hard Drive Data Encrypt Enclosure. This is an Aluminum enclosure which support 3.5” IDE Hard drive. It is simple to install and comes with all the parts you need to create an external IEEE1394A FireWire/ Hi-Speed USB2.0 device. About This Guide Before you begin using the PHR-100AC, be sure to read this manual in its entirety.
Package Contents The PHR-100ACE-Aluminum IEEE1394A FireWire/Hi-Speed USB2.0 3.5" Hard Drive Enclosure package includes the following software and documentation: • • • • • • The software CD contains the drivers and manual 6 pin to 6 pin FireWire Cable USB2.0 cable IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure 2 x Secure Keys AC/DC Adapter Safety Precautions ON INSTALLATION 1. To reduce the risk of fire or electric shock, do not expose this product to rain, water or moisture. 2.
ON TRANSPORTATION Save the packing materials as you may need to repack and transport the unit at a later date. Always remove the disc before moving the unit. ON POWER SOURCES When you are not using the unit for a long time, disconnect the power cord from the unit. To unplug the AC power adapter from the wall outlet, grasp the adapter itself. Do not pull the cord.
Hardware Basic Precaution: Please make sure your hand is dry and remove static from your body by touching metal parts of your computer chassis.
Hardware Installation Enclosure Sleeve Front Back FireWire/USB2.0 Encrypt Drive Front Panel PHR-100ACE Back Panel 1. Unscrew to loosen the Back Panel and remove the Back Panel from the Enclosure. 2. Use your thumb to push the Base Plate out.
3. Set the Enclosure Sleeve aside. 4. Install 4 white Anti-Shock Mounts w/10mm screw into both sides of the hard drive. Do not tighten the screws yet. (A) (B) 5. Set up the jumper ID as “Master” mode according to the HDD jumper setting spec or “Single Master” mode for Western Digital model hard drive. Connect (A) the 40-pin connector and (B) the power connector from the Base Plate securely to the hard drive.
6. (1)Slide the hard drive into the front Base Plate first and (2) press down on the hard drive, make sure all 4 Anti-Shock Mounts sit inside the Support Slot. 7. Pressing down the hard drive and tighten all 4 screws to secure the hard drive to the Base Plate. Front Sleeve hard drive Base Plate 8. Align the Base Plate to the Sleeve Slot.
9. Install the Back Panel to the Enclosure.. 10. Secure the Back Panel with the 5mm screw 11. Plug in secure key, plug the AC adapter into the Enclosure and turn the power switch on. You may now connect the unit to your computer using a USB or FireWire Cable.
Secure Key 1394A FireWire Data cable connector USB Data cable connector Power On/Off Switch Secure Key Port Back Panel Power Connector Macally Firewire/USB2.0 Data Encrypt enclosure comes with two identical secure keys, which are powered by NIST and CSE certified DES 40-bit encryption engine. Independing to OS, it provides real-time, automatic hardware based bit-by-bit data encryption to entire hard drive including boot sector in the enclosure.
Software Installation Software Installation for Mac MacOS Software Installation FireWire Connection for MacOS MacOS will recognize the enclosure automatically, initialize (if the drive is not initialized) and mount the drive to desktop. USB2.0 Connection for MacOS MacOS will recognize the enclosure automatically, initialize (if the drive is not initialized) and mount the drive to desktop. * Plug in the USB2.0 enclosure and it is ready to use. For USB2.0 performance, you must plug the enclosure into a USB2.
Software Installation for PC IEEE1394 FireWire Connection for Windows98SE/ME/2000/XP Plug the IEEE 1394 cable into any available port, Windows(98,ME,2000 or XP) will start installing for the proper driver. Please follow the on screen instruction to complete the driver installation. (You may need the Windows CD during the installation.) USB Connection for Windows ME/2000/XP Plug the USB cable into any available port, Windows(,ME,2000 or XP) will start installing for the proper driver.
Select on the “Specify a location” option and type in “x:\PHR-100ACE\DRIVERS” where “x” is the letter of the CD-ROM drive with the Drivers CD inserted, or click on “Browse” to choose the corresponding driver folder in the CD. Then click “Next”. Windows will search the location and find the appropriate driver from the Drivers CD. Click “Next”. The window shown above indicates that the driver installation has been completed. Click “Finish” to end the installation.
After the installation, you will get USB2.0 Hi-Speed performance, if PHR100ACE is connected to USB2.0 host adapter; if connected to USB1.1 port in your computer, you will get USB1.1 speed only. Note: If you don’t see the new drive letter added in My Computer after driver is loaded properly, the reason could be the hard disk has no partition and format yet, please partition and format the drive in the enclosure before using it.
1. Please run FDISK utility from MS-DOS command prompt. 2. Follow the screens below to complete the Hard Disk Partition.
Step 3 Step 4 Step 5 19
Step 6 Step 7 Step 8 3. After restart the computer, please verify the new drive in "My Computer". 4. Please do a full format to the hard drive before using it.
For Windows2000/XP If you can see a new entry under Disk drives of Device Manager, you are ready to partition and format the drive. 1. Open Control panel, “Administrative Tools” and “Computer management”. Step 2 2. Click on “Disk Management”. Step 3 3. “Write Signature and Upgrade Disk Wizard” windows will show up and click “Next”.
Step 4 4. Write a signature to the new drive, click “Next”. Step 5 5. Click “Finish” to close the wizard.
6. Select the new “Unallocated” disk, and then right click to choose “Create partition”. Step 7 7. Follow the onscreen instruction to partition and fully format the drive.* *note: If it assigns a new hard drive letter but format dose not run automatically, please exit “Computer Management”, and find the new drive letter in My computer to format it completely.
