Operating instructions

MCS2000 by MacAllister
Getting started...
GB
IE
05
Before you start
Assemble the guide bar and saw chain before operation. Follow the
operating instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product.
Assembly
You will need
(items not supplied)
Saw chain oil
(items supplied)
Saw chain
Guide bar cover
WARNING! Read all the instructions carefully! Do not
connect the product to the power supply until it is completely
assembled! Always wear gloves during assembly!
Chain and guide bar
Use only the guide bar (4) and >
saw chain (3) according to the
technical data of the product.
Place the product on a suitable >
at surface with the cover (9)
facing upwards.
Loosen the cover (9) by >
turning the locking wheel (7)
anticlockwise (Fig. 1, a) and
remove it.
a
b
9 7
Fig. 1
Spread the saw chain (3) out >
with the cutting edges of the
chain pointing in the rotational
direction and slide the chain into
the groove around the guide bar
(Fig. 2).
3
Fig. 2
MNL_MCS2000_DFT_GB_V06_111108.indd 5 11/8/11 5:11:05 PM